Lubricate the Bearing Plates and Springs:
The next step requires a ladder. Most garage doors have springs at the top. The bearing plates are round and located on either side of the spring. Both the bearing plates and springs need to be lubricated to ensure proper operation.
To lubricate these parts, spray or wipe them thoroughly with grease. After applying some grease, open and close the garage door to help distribute the grease more evenly. If you find that the springs on the door are bent or otherwise damaged, they should be replaced. Replacing garage door springs is difficult and can lead to serious injury, so it’s best to hire a qualified professional to do the job.
Before you start.
Lubricate the Hinges and Rollers:
Once you’ve finished cleaning the track, it’s time to lubricate some of the components. When considering how to lubricate your garage door rollers and hinges, remember that it’s best to use lithium-based grease or silicone grease.
To lubricate the hinges, carefully lift the door (or have someone lift it for you). Spray or wipe grease on the hinges as the door bends along the track. Next, lubricate the rollers. The roller is attached along the track of the door next to the hinges. A thin grease suction tube attachment can be used to lubricate the small ball bearings in this roller.
Once you’ve finished cleaning the track, it’s time to lubricate some of the components. When considering how to lubricate your garage door rollers and hinges, remember that it’s best to use lithium-based grease or silicone grease.
To lubricate the hinges, carefully lift the door (or have someone lift it for you). Spray or wipe grease on the hinges as the door bends along the track. Next, lubricate the rollers. The roller is attached along the track of the door next to the hinges. A thin grease suction tube attachment can be used to lubricate the small ball bearings in this roller.
Step 3: Lubricate the bearing plates and springs.
The next step requires a ladder. Most garage doors have springs at the top. The bearing plates are round and located on either side of the spring. Both the bearing plates and springs need to be lubricated to ensure proper operation.
To lubricate these parts, spray or wipe them thoroughly with grease. After applying some grease, the garage door should be opened. This movement will help ensure that the grease is more evenly distributed around. If you find that the springs on the door are bent or otherwise damaged, they should be replaced. Replacing garage door springs is difficult and can lead to serious injury, so it’s best to hire a qualified professional to do the job.
Step 4: Lubricate the top rail and arm bars
Learning how to lubricate a garage door is an essential home maintenance task. Keeping your garage door and its moving parts properly lubricated will extend the life of the door and ensure it runs smoothly and quietly.
Fortunately, lubricating your garage door isn’t too complicated. By following these steps in order, you can accomplish this task yourself. However, if you notice an area of the door that may need repair, it may be time to contact a qualified professional. Regular maintenance will keep your garage door functioning smoothly, ensuring its continued reliability for years to come.
pictures SOURCE : istockphoto / bob vila
